RFM offers a full set of custom embedded wireless networking solutions like Zigbee wireless mesh sensor networks, RF modules, IC transceiver, IC transmitters and IC receivers. RFM, Inc. manufactures low power wireless and RF radio modules, wireless mesh nodes for distributed sensing on distributed sensor networks. Low Power radio, n../arrowband and short range devices, front end saw filters, active RFID, RFIC, coupled resonator filters, single silicon chips in the 70MHZ and 300-1000Mhz range.
 
Technical Support       Log In


Bookmark and Share


Wireless Device
Selection Guide

ZigBee Pro Module

ZigBee Pro Module

Transceiver Modules Save Original Equipment Manufacturers (OEMs) money and time!

  • All RFM OEM modules come with FCC, IC and ETSI module certification as applicable. No FCC or ETSI-type acceptance
          testing required.
  • Each RFM transceiver module is treated just like other integrated circuits, with reflow soldering or connector pins for
          optional use.
  • Small size, there is no size penalty associated with the convenience of a module.

    • 802.11g
    • 802.15.4
    • FHSS Modules
    • FHSS Boxed Radios
    • Wireless Mesh
    • WirelessHART
    • ZigBee

    Wi-Fi SENSOR NETWORKING. The WSN802G is a 2.4 GHz IEEE 802.11g radio transceiver module that enables OEMs to build low-power wireless local area networking (WLAN) and sensor monitoring solutions for the global market.
    802.11g Modules Developer Kits - Order Today 802.11g Industrial Bridges      
    Designed for machine-to-machine applications developed for existing 802.11g networks
  • DSSS technology
  • Data Rate 2 Mbps (11 Mbps coming soon)
  • Range up to 1,000M

    • 802.11g Transceiver Modules


    INTEGRATES GAINSPAN SoC. The WSN802G is the first RFM RF module to integrate the Gainspan GS1010 System on Chip (SoC).

    EXCEPTIONALLY LOW-POWER PROFILE. The WSN802G delivers an exceptionally low power profile and long battery life capabilities in a fully functional, certified radio module that is easily interfaced to existing 802.11b/g infrastructure for a wide variety of sensor monitoring and WLAN applications.

    SLEEP CAPABILITY. The Gainspan GS1010 SoC low average power consumption is obtained by putting the SoC to sleep between active periods. Depending upon the frequency of active periods, a single AA Lithium cell can provide a battery life in excess of 5 years. The module’s peak current consumption is about 150 mA, allowing a battery to adequately power the device.

    I/O AND AUTO REPORT CAPABILITY. The WSN802G features Analog, Digital and Serial I/O with configurable automatic I/O reporting that includes interval timer, interrupt and ADC level triggers.

    SAME FORM FACTOR. At 1.05 sq. inch footprint, the WSN802G has the same form factor as RFMs 802.15.4 LPR2430 series, wireless mesh XDM2140 series, and ZigBee ZMN2430 series modules.

    SAME PINOUT as RFMs 802.15.4 LPR2430 series, wireless mesh XDM2140 series, and ZigBee ZMN2430 series modules.

    FCC / IC / ETSI CERTIFIED. The WSN802G is certified for unlicensed operation in the USA, Canada and Europe.

    RFM Part   Frequency   Transmit Power   Data Rate   RF Conn/ Antenna Development Kit   List Price  
    WSN802GC 2.4 GHz 10 mW 1-11 Mbps U.FL WSN802GDK $39.00
    WSN802GCA 2.4 GHz 10 mW 1-11 Mbps Chip Antenna WSN802GDK $39.00
    WSN802GP 2.4 GHz 10 mW 1-11 Mbps U.FL WSN802GDK $39.00
    WSN802GPA 2.4 GHz 10 mW 1-11 Mbps Chip Antenna WSN802GDK $39.00

    back to top

    802.11g Developer Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Description   List Price  
    WSN802GADK The WSN802GADK Contains: 1 WSN802GPA module, 1 WSN802GPA development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide $139.00
    WSN802GADK-A The WSN802GADK-A Contains: 1 WSN802GPA module, 1 WSN802GPA development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide AND wireless router $199.00
    WSN802GDK The WSN802GDK Contains: 1 WSN802GP module, 1 WSN802GP development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide $139.00
    WSN802GDK-A The WSN802GDK-A Contains: 1 WSN802GP module, 1 WSN802GP development board, Serial and USB Cables, 9 V Battery and Wall-mount Power Supply, Antenna, Program CD with software and manuals, Quick Start Guide AND wireless router $199.00

    Industrial 802.11g Bridges
    The HN-208 series is a versatile, low cost, multi-purpose 802.11g wireless data modem. The HN-208 has an integral 6dB patch antenna creating a "single piece" modem and is rated over the full -40C to +85C temperature range. The HN-208 communicates with existing 802.11g access points, and supports peer-to-peer links as well. The HN-208 is available in three separate versions offering an Ethernet connection, an RS-232 serial connection, or a single I/O connection.
    RFM Part   Frequency   Transmit Power Channels   Data Rate   RF Conn/ Antenna List Price  
    HN-208E 2.4 GHz 100 mW 13 11 Mbps Integral 6dB Patch $399.00
    HN-208EX 2.4 GHz 100 mW 13 11 Mbps Reverse TNC
    HN-208I 2.4 GHz 100 mW 13 11 Mbps Integral 6dB Patch
    HN-208IX 2.4 GHz 100 mW 13 11 Mbps Reverse TNC
    HN-208S 2.4 GHz 100 mW 13 11 Mbps Integral 6dB Patch
    HN-208SX 2.4 GHz 100 mW 13 11 Mbps Reverse TNC

    back to top

    IEEE 802.15.4 STANDARD. Based on the IEEE 802.15.4 wireless standard, the LPR2430 series modules are easy to integrate and provide robust wireless communications in applications where full mesh network operation is not required.
    Modules Developer Kits - Order Today Serial Data Modems  

    VERSITILITY. Comprised of the low-power 1mW RF power LPR2430 / LPR2430A and the extended range 100mW RF power LPR2430ER / LPR2430ERA, the RFM LPR2430 Series modules provide the flexibility and versatility to serve a variety of applications, from simple cable replacement to remote terminal data collection to sophisticated sensor networks. The LPR2430 includes CNL V2.0 Network Layer firmware which features a flexible and simple-to-use Application Programming Interface.

    SLEEP CAPABILITY. LPR2430 series modules provide years of battery operation supported through two sleep modes. Timer sleep allows the module to be configured to wake as often as every 100 milliseconds or as infrequently as once every 3.5 years. Interrupt sleep lets the module sleep until it is awoken by either an edge triggered interrupt or an ADC value exceeding configurable limits. Regardless of what wakes the module, the designer can configure the module to remain awake for up to 2 seconds after sending its data to provide an opportunity for an application to communicate to the module before it returns to sleep.

    I/O AND AUTO REPORT CAPABILITY. LPR2430 series modules feature Analog, Digital and Serial I/O including Analog & Digital I/O binding.

    • Standard UART interface for serial communications plus 6 GPIO, 3 ADCs, and 2 DACs (PWMs)
    • With the I/O Binding feature, one node has the ability to output on 2 GPIO lines the input value of 2 GPIO lines from another node
    • Auto-reporting features allow many sensor nodes to be built without a dedicated microcontroller - the micro-controller on the module does all the work
    • Auto-reporting mode provides module I/O updates based on timer or interrupts - without the need for the application to poll or otherwise request data
    • Interrupts are generated by edge-triggered events or by exceeding user-defined limits on ADC values - and any interrupt can be used to wake a sleeping mode and have the module send its I/O data
    OVERCOMES OBSTRUCTIONS / MULTIPATH FADES. LPR2430 modules feature a one-hop relay that enables one node to send data to a base radio through another node. This unique feature alleviates problems caused when a network works well at commissioning but later periodically loses nodes for periods of time. Yet it doesn’t burden the entire network with the complexity and latency of full mesh – the relay is only used when the node cannot communicate directly with the base. Nodes periodically verify their communication paths to the base as well as to other nodes in the network. The application is not even aware this is happening – it is all handled by the modules.

    SAME FORM FACTOR. At 1.05 sq. inch footprint, the LPR2430 series has the same form factor as RFMs Wi-Fi WSN802G modules, wireless mesh XDM2140 series modules, and ZigBee ZMN2430 series modules.

    SAME PINOUT as RFMs Wi-Fi WSN802G modules, wireless mesh XDM2140 series modules, and ZigBee ZMN2430 series modules

    FCC / IC / ETSI CERTIFIED. The LPR2430 series modules are certified for unlicensed operation in the USA, Canada and Europe.


    back to top

    802.15.4 Modules
    RFM Part   Frequency   Transmit Power Data Rate   RF Conn/ Antenna Development Kit List Price  
    LPR2430 2.4 GHz 1 mW 250 kbps Module Pin LPR2430DK $22.00
    LPR2430A 2.4 GHz 1 mW 250 kbps Chip Antenna LPR2430ADK $23.00
    LPR2430ER 2.4 GHz 10 to 100 mW 250 kbps Module Pin LPR2430ERDK $36.00
    LPR2430ERA 2.4 GHz 10 to 100 mW 250 kbps Chip Antenna LPR2430ERADK $37.50

    802.15.4 Developer Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Description   List Price  
    LPR2430ADK Contains: 4 LPR2430A modules (2 installed on developer boards labeled Base and Remote), 2 9 V wall-plug power suppliers (120/240 VAC plus 2 9 V batteries), 2 RS-232 cables, 2 USB Serial cables, Documentation and Software C $299.00
    LPR2430DK Contains: 4 LPR2430 modules (2 installed on developer boards labeled Base and Remote), 2 patch antennas, 2 dipole antennas with MMCX to SMA-R adapter cables, 2 9 V wall-plug power suppliers (120/240 VAC plus 2 9 V batteries), 2 RS-232 cables, 2 USB Serial cables, Documentation and Software CD $299.00
    LPR2430ERADK Contains: 4 LPR2430ERA modules (2 installed on developer boards labeled Base and Remote), 2 9 V wall-plug power suppliers (120/240 VAC plus 2 9 V batteries), 2 RS-232 cables, 2 USB Serial cables, Documentation and Software C $299.00
    LPR2430ERDK Contains: 4 LPR2430ER modules (2 installed on developer boards labeled Base and Remote), 2 patch antennas, 2 dipole antennas with MMCX to SMA-R adapter cables, 2 9 V wall-plug power suppliers (120/240 VAC plus 2 9 V batteries), 2 RS-232 cables, 2 USB Serial cables, Documentation and Software CD $299.00

    back to top

    802.15.4 Wireless Serial Data Modem
    The ZN-241G is a low-cost, 802.15.4 wireless data modem that can provide an auto-configured, wireless replacement for RS-232 cable in office environments, and can also serve as a platform for multi-drop RS-485 networks in industrial settings. Housed in a ruggedized metal enclosure, the ZN-241G replaces hard wiring in commercial environments that make wired connections challenging or impractical or that require frequent reconfiguration.

    For point-to-point communications, ZN-241Gs configure the link automatically; all that's required is plugging the devices into two serial interfaces and turning on power. Point-to-multipoint links are set up by via an included utility that simplifies the configuration of network IDs and channels, and a repeater function allows a remote node to relay data through another remote node when the direct path is blocked. The ZN-241G offers RS-232, USB, and RS-485 interface options, and operates license-free worldwide at 2.4 GHz with over-the-air data rates of up to 250 Kbps.

    RFM Part   Frequency   Transmit Power Data Rate   RF Conn/ Antenna Description   List Price  
    ZN-241G 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA Standalone RS-232 Serial 802.15.4 Modem providing 100mW transmit power, with DB9 Connector, Antenna, Power Supply, and Serial Cable $129.00
    ZN-241GI 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA Standalone Half-duplex RS-485/RS-232 Serial 802.15.4 Modem with Screw Terminal Connector, Antenna, and Power Supply $149.00
    ZN-241GIOEM 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA 10 Pack of the ZN-241GM without Antenna or Power Supply $990.00
    ZN-241GOEM 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA (10 Pack of the ZN-241G without antenna, power supply or serial cable) $850.00
    ZN-241GSK 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA Starter kit including 2 ZN-241Gs, 2 2 dBi Antennas, 2 Power Supplies, 2 Serial Cables and Windows-based Configuration Utility $495.00
    ZN-241GU 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA Standalone USB Serial 802.15.4 Modem, Antenna, Power Supply, and USB Cable (Can be powered from USB port) $129.00
    ZN-241GUOEM 2.4 GHz 10 to 100 mW 250 kbps Reverse SMA 10 Pack of the ZN-241GU without Antenna, Power Supply, or USB Cable $850.00

    back to top


    ULTRA RELIABLE. Based on RFMs proprietary frequency hopping spread spectrum (FHSS) technology, RFMs FHSS module are especially well-suited to commercial, industrial and factory environments. They ensure long-range data throughput even in the presence of electrical noise and multi-path fading.
    DNT-Series Multi-Function
    Configurable Modules     		WIT-Series Wireless Telemetry Modules Developer Kits - Order Today
    VERSATILITY. RFM offers two families of FHSS modules:
    • DNT series of highly-reliable multi-purpose FHSS modules for sensor networking for RF data rates of 38 kb/s to 500 kb/s, offered at a very low-price
    • WIT series of ultra-reliable FHSS modules for wireless telemetry applications for RF data rates of 172.8 kb/s to 1.23 Mb/s
    FLEXIBILITY. The DNT series modules are highly configurable and enable the designer to modify the radio for use in many different applications.The DNT series modules provide multiple software configurable RF data rates and RF powers and support Analog and Digital I/O and Serial data. The WIT series includes a variety of radio options and supports UART.

    SUPERIOR TRANSMISSION RANGES. 900 MHz DNT modules transmit 40+ miles, 2.4 GHz DNT modules and 900 MHz WIT modules transmit 20+ miles with omni-directional antennas; 2.4 GHz WIT modules transmit 5+miles with gain antennas.

    STORE AND FORWARD REPEATING. RFMs FHSS modules feature store-and-forward repeating to extend range and enable transmission around barriers without expensive dedicated repeaters.

    LOW POWER. The DNT series modules consume a low amount of power to allow them to operate for months on battery and the WIT series consume a sufficiently low amount of power to allow 8+ hours of battery operation.

    FCC / IC / ETSI CERTIFIED. RFMs FHSS modules are certified for unlicensed operation in the USA, Canada and Europe as applicable by frequency band.

    RoHS COMPLIANT. The DNT series and WIT2410, WIT2450, and WIT2492 series modules comply with Directive 2002/95/EC (RoHS)

    back to top

    DNT-Series FHSS Multi-Function Configurable Modules for
    Wireless Sensor Networking
    900 MHz and 2.4 GHz • 38 to 500 kb/s

    Comprised of the 900 MHz DNT900 and the 2.4 GHz DNT2400, the DNT series is a low-cost, long-range, multi-purpose, multi-function frequency hopping line of RF modules. DNT modules support Analog and Digital I/O and Serial data, and have the ability to auto-report and sleep between reports thereby reducing power consumption. DNT modules support all standard serial data rates for host communications from 1.2 to 460.8 kb/s. On-board data buffering and an error-correcting air protocol provide smooth data flow and simplify the task of integration with existing applications.

    900 MHz DNT900 — The 900 MHz ISM band allows license-free use in the US, Canada, South America, Australia and New Zealand.

    2.4 GHz DNT2400 — 2.4 GHz ISM band allows the DNT2400 to be used license-free world-wide.

    Highly Reliable and Secure FHSS Capabilities at Very Low Cost

    • RFM proprietary frequency hopping technology provides both robust communications reliability and interference rejection while minimizing multi-path fading
    • 40+ mile range (DNT900) and 5+ mile range (DNT2400) with omni-directional antennas (antenna height dependent)
    • AES-128 Encryption allows the most sensitive data to be securely sent wirelessly
    • Support for point-to-point, point-to-multipoint, and peer-to-peer applications
    • Low cost provides substantial cost savings over existing long-range radios without compromising features or radio performance
    • Non-volatile memory stores DNT module configuration when powered off
    • Dynamic TDMA slot assignment that maximizes throughput and CSMA modes that maximizes network size
    • Transparent ARQ protocol with data buffering ensures data integrity
    • Simple serial interface handles both data and control at up to 460.8 kb/s
    Highly Configurable Including RF Data Rate and RF Transmit Power

    The DNT Series modules provide a selection of over-the-air data rates and transmit power levels thus allowing one module to work for many products. When using the DNT Series, designers can be confident that the radio performance can be modified if needed when the design is finished without having to design-in another radio.

    • Configurable RF Data Rates from 38 kb/s and 500 kb/s • Multi-point, point-to-point, peer-to-peer and store & forward repeating
    • DNT900 configurable RF Transmit Power of 1 mW to 1W • Bandwidth Allocation
    • DNT2400 configurable RF Transmit Power of 1 mW to 100 mW • Configurable Frequency Hopping Rate
    • 40+ mile range DNT900, 5+ mile DNT2400 with omni-directional antennas • Analog and Digital I/O
    • Co-Located Network Support
    • Sleep Modes
    RFM Part   Frequency   Transmit Power Data Rate   RF Conn/ Antenna Development Kit   List Price  
    DNT2400C 2.4 GHz 1 to 100mW 500 kbps U.FL DNT2400DK $69.00
    DNT2400P 2.4 GHz 1 to 100mW 500 kbps U.FL DNT2400DK $69.00
    DNT24C 2.4 GHz 10 to 100mW 250 kbps U.FL DNT24DK $29.00
    DNT24CA 2.4 GHz 10 to 100mW 250 kbps Chip Antenna DNT24ADK $29.00
    DNT24P 2.4 GHz 10 to 100mW 250 kbps U.FL DNT24DK $29.00
    DNT24PA 2.4 GHz 10 to 100mW 250 kbps Chip Antenna DNT24ADK $29.00
    DNT900C 900 MHz 1mW to 1W 500 kbps U.FL DNT900DK $69.00
    DNT900P 900 MHz 1mW to 1W 500 kbps U.FL DNT900DK $69.00
    DNT90C 900 MHz 150 mW 100 kbps U.FL DNT90DK $29.00
    DNT90P 900 MHz 150 mW 100 kbps U.FL DNT90DK $29.00

    back to top

    WIT-Series FHSS Modules for Wireless Telemetry
    900 MHz and 2.4 GHz • 172.8 – 1.23 Mb/s
    Especially well-suited to commercial, industrial and factory settings, RFMs WIT modules ensure long-range data throughput even in the presence of electrical noise and multi-path fading. They can be configured in point-to-point and point-to-multipoint network topologies.

    WIT modules operate in either a TDMA mode with dynamic, automatic bandwidth allocation which support up to 62 remotes or a CSMA mode that supports up to 1024 remotes. The TDMA mode is used where guaranteed bandwidth and latency are required. The CSMA mode is used where large numbers of remotes are needed. Latencies of the TDMA mode are as low as 5 ms.

    WIT modules consume a sufficiently low amount of power to allow 8+ hours of battery operation. Error-less data reception is further assured by CRC error checking and ARQ (automatic repeat-request) schemes for auto-retransmission of bad packets.

    License-free use — the 900 MHz ISM band of the WIT910 allows license-fee use in the US, Canada, South America, Australia and New Zealand; the 2.4 GHz ISM band allows the WIT2410, WIT2411,and WIT2450 modules to be used license-free world-wide

    High-speed wireless data — From 172.8 kb/s for extended range applications such as SCADA up to 1.23 Mb/s throughput to serve virtually any data need

    Superior transmission range — 900 MHz WIT910 transmits 1000 foot indoors and 20+ miles outdoors with omnidirectional antennas; 2.4 GHz WIT2410, WIT2411,and WIT2450 modules transmit 900 foot indoors and over 5 miles outdoors with gain antennas

    Store-and-forward repeating — WIT910 and WIT2450 feature store-and-forward repeating o extend range and enable transmission around barriers without expensive dedicated repeaters

    * WIT910, WIT934, and WIT2411 modules are not RoHS compliant.

    RFM Part   Frequency   Transmit Power Data Rate   RF Conn/ Antenna Development Kit List Price  
    WIT2410M4G 2.4 GHz 10 to 100 mW 460.8 kbps MMCX WIT2410DK $259.00
    WIT2410S4G 2.4 GHz 10 to 100 mW 460.8 kbps MMCX WIT2410SDK $259.00
    WIT2411D 2.4 GHz 10 to 100 mW 1.23 Mbps MMCX WIT2411DK $425.00
    WIT2411F 2.4 GHz 10 to 100 mW 1.23 Mbps MMCX WIT2411DK $425.00
    WIT2450FG 2.4 GHz 40 to 250 mW 460.8 kbps MMCX WIT2450DK $125.00
    WIT2450M2 2.4 GHz 40 to 250 mW 460.8 kbps MMCX WIT2450DK $125.00
    WIT2492M 2.4 GHz 10 mW to 100 mW 921.6 kbps MMCX $250.00
    WIT910M 900 MHz 1 W 172.8 kbps MMCX WIT910DK $250.00
    WIT910M2 900 MHz 1 W 172.8 kbps MMCX WIT910DK $250.00
    WIT910S 900 MHz 1 W 172.8 kbps MMCX WIT910SDK $250.00

    back to top

    FHSS Developer Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Description   List Price  
    DNT2400DK (2) DNT2400P radios, (2) DNT2400 development boards, (2) 2 dBi dipole antennas, (2) 120/240 VAC 9 V wall-plug power suppliers, (2) 9 V batteries, (2) RJ-45/DB-9F cable assemblies, (1) RJ-11/DB-9F cable assembly, (2) A/B USB cables, DNT2400DK documentation and software CD $359.00
    DNT24ADK (2) DNT24PA radios installed in DNT24 interface boards, labeled Base and Remote
    (2) wall-plug power suppliers, 9 VDC, 120/240 VAC, plus 2 batteries, 9 VDC
    (2) RJ-45/DB-9F cable assemblies and two A/B USB cables
    Documentation and software CD    		 $199.00
    DNT24DK (2) DNT24P radios installed in DNT24 interface boards, labeled Base and Remote
    (2) patch antennas and two 2 dBi dipole antennas with MMCX/RSMA adaptor cables
    (2) wall-plug power suppliers, 9 VDC, 120/240 VAC, plus 2 batteries, 9 VDC
    (2) RJ-45/DB-9F cable assemblies and two A/B USB cables
    Documentation and software CD    		 $199.00
    DNT900DK (2) DNT900P radios, (2) DNT900 development boards, (2) 2 dBi dipole antennas, (2) 120/240 VAC 9 V wall-plug power suppliers, (2) 9 V batteries, (2) RJ-45/DB-9F cable assemblies, (1) RJ-11/DB-9F cable assembly, (2) A/B USB cables, DNT900DK documentation and software CD $359.00
    DNT90DK (2) DNT90 modules with pins, (2) DNT90 development boards, (2) USB cables, (2) Serial cables, Antennas and RF cables, Program CD with software and manuals, Quick start guide $199.00
    WIT2410DK (2) HN-510 serial modems with flow control indicators, RS-232 interface, battery pack, power supply, dipole antenna, (2) WIT2410M modules, RF cables, antennas and programming software $795.00
    WIT2410SDK SNAP2410 Developer Kit containing 2 HN-510 serial modems with flow control indicators, RS-232 interface, battery, dipole antenna, 1 SNAP2410 10/100BaseT access point, 2 WIT2410 modules, RF cable, antennas and programming software $1,795.00
    WIT2411DK (2) HN-211 serial modems with flow control indicators, RS-232 and USB interfaces, battery, dipole antenna, (2) WIT2411 modules, and programming software $995.00
    WIT2411SDK SNAP2411 Developer Kit containing 2 HN-211 serial modems with flow control indicators, RS-232 and USB interfaces, battery, dipole antenna, 1 SNAP2411 10/100BaseT access point, 2 WIT2411 modules, RF cables and dipole antennas and programming software $1,995.00
    WIT2450DK (2) HN-550 serial modems with flow control indicators, RS-232 interface, battery pack, power supply, dipole antenna, (2) WIT2450 modules, RF cables, antennas and programming software $495.00
    WIT910DK (2) HN-591 serial modems with flow control indicators, RS-232 interface, battery pack, power supply, dipole antenna, (2) WIT910M modules, RF cables, antennas and programming software $795.00
    WIT910SDK SNAP910 Developer Kit containing 2 HN-591 serial modems with flow control indicators, RS-232 interface, battery, dipole antenna, 1 SNAP910 10/100BaseT access point, 2 WIT910 modules, RF cables, antennas and programming software $1,795.00

    back to top

    ULTRA RELIABLE. Based on RFMs proprietary frequency hopping spread spectrum (FHSS) technology, RFMs FHSS module are especially well-suited to commercial, industrial and factory environments. They ensure long-range data throughput even in the presence of electrical noise and multi-path fading.
    HN Serial Modems HNIO I/O Modems & Relays SEM Ethernet Bridges SNAP Access Points
    HN-91 Series Long Range Standalone Wireless Modems
    900 MHz • 172.8 kp/s
    Built on the RFM WIT910 RF modules, the versatile RFM HN-91 series wireless modems employ RFM proprietary FHSS technology and are well-suited for any industrial or commercial application needing complete, reliable, long-range, serial modems. The HN-91 series modems can be used standalone as base stations or they can be used as remote stations when paired with RFM WIT910 RF modules.

    HN wireless modems are ideal for fixed wireless network applications in a range of indoor, outdoor, and harsh environments. They support data 172.8 kb/s data rate, are Class I Div 2 certified, and support Modbus, DNP3, and DF1 protocols. HN wireless modems come in a variety of enclosures including NEMA 4X and IP 66 rated enclosures with an effective operating temperature range of -30 °C to +70 °C.

    The HN-591 desktop wireless modems are right at home in the relative comfort of a plant foreman's office, while the HN-291modems deliver indoor / outdoor SCADA flexibility.

    Combining HN-series Wireless Modems with SNAP Serial-to-Ethernet Access Point. Add SNAP Wireless Serial-to-Ethernet Access Points as a base station for both WIT OEM modules and HN modems, which allow non-Ethernet serial devices to operate as nodes on an Ethernet network.

    *Boxed products based on WIT910, WIT934, and WIT2411 modules are not RoHS compliant.

    RFM Part   Frequency   Transmit Power   Channels   Data Rate   RF Conn/ Antenna   List Price  
    HN-291 900 MHz 1 W 54 172.8 kbps Internal 3 dBi Patch $419.00
    HN-291X 900 MHz 1 W 54 172.8 kbps Reverse TNC $479.00
    HN-294 900 MHz 1 W 54 172.8 kbps Internal 3 dBi Patch $419.00
    HN-294X 900 MHz 1 W 54 172.8 kbps Reverse TNC $479.00
    HN-591 900 MHz 1 W 54 172.6 kbps $619.00

    back to top

    HN-50 Series Low Cost Standalone Wireless Modems
    2.4 GHz • 460.8 kb/s

    Built on the RFM WIT2450 RF modules, the versatile RFM HN-50 series wireless modems employ RFM proprietary FHSS technology and are well-suited for any industrial or commercial application needing complete, reliable, long-range, serial modems. The HN-50 series modems can be used standalone as base stations or they can be used as remote stations when paired with RFM WIT2450 RF modules.

    HN wireless modems are ideal for fixed wireless network applications in a range of indoor, outdoor, and harsh environments. They support data 460.8 kb/s data rate, are Class I Div 2 certified, and support Modbus, DNP3, and DF1 protocols. HN wireless modems come in a variety of enclosures including NEMA 4X and IP 66 rated enclosures with an effective operating temperature range of -30 °C to +70 °C.

    Combining HN-series Wireless Modems with SNAP Serial-to-Ethernet Access Point. Add SNAP Wireless Serial-to-Ethernet Access Points as a base station for both WIT OEM modules and HN modems, which allow non-Ethernet serial devices to operate as nodes on an Ethernet network.

    RFM Part   Frequency   Transmit Power Channels   Data Rate   RF Conn/ Antenna List Price  
    HN-250 2.4 GHz 40 to 250 mW 93 460.8 kbps Internal 6 dBi Patch $299.00
    HN-250-100 2.4 GHz 40 to 250 mW 93 460.8 kbps Internal 6 dBi Patch $319.00
    HN-250U 2.4 GHz 40 to 250 mW 93 460.8 kbps Internal 6 dBi Patch $299.00
    HN-250U-100 2.4 GHz 40 to 250 mW 93 460.8 kbps Internal 6 dBi Patch $319.00
    HN-250UX 2.4 GHz 40 to 250 mW 93 460.8 kbps Reverse TNC $373.00
    HN-250X 2.4 GHz 40 to 250 mW 93 460.8 kbps Reverse TNC $373.00
    HN-254 2.4 GHz 40 to 250 mW 93 460.8 kbps Internal 6 dBi Patch $299.00
    HN-254U 2.4 GHz 40 to 250 mW 93 460.8 kbps Internal 6 dBi Patch $299.00
    HN-254UX 2.4 GHz 40 to 250 mW 93 460.8 kbps Reverse TNC $373.00
    HN-254X 2.4 GHz 40 to 250 mW 93 460.8 kbps Reverse TNC $373.00
    HN-550 2.4 GHz 40 to 250 mW 93 460.8 kbps Reverse SMA $562.00

    back to top

    HN-10 and HN-11 Series Standalone Wireless Modems
    2.4 GHz • 460.8 kb/s

    The HN-10 series modems are built on RFM WIT2410 RF modules whereas the HN-11 series modems are built upon the WIT2411 RF modules. Both the HN-10 and HN-11 series modems employ RFM proprietary FHSS technology and are well-suited for any industrial or commercial application needing complete, reliable, long-range, serial modems.

    The HN-10 series modems can be used standalone as base stations or they can be used as remote stations when paired with RFM WIT2410 RF modules. The HN-11 series modems can be used standalone as base stations or they can be used as remote stations when paired with RFM WIT2411 RF modules.

    HN wireless modems are ideal for fixed wireless network applications in a range of indoor, outdoor, and harsh environments. They support data 460.8 kb/s data rate, are Class I Div 2 certified, and support Modbus, DNP3, and DF1 protocols. HN wireless modems come in a variety of enclosures including NEMA 4X and IP 66 rated enclosures with an effective operating temperature range of -30 °C to +70 °C.

    Combining HN-series Wireless Modems with SNAP Serial-to-Ethernet Access Point. Add SNAP Wireless Serial-to-Ethernet Access Points as a base station for both WIT OEM modules and HN modems, which allow non-Ethernet serial devices to operate as nodes on an Ethernet network.

    *Boxed products based on WIT910, WIT934, and WIT2411 modules are not RoHS compliant.

    RFM Part   Frequency   Transmit Power   Channels   Data Rate   RF Conn/ Antenna List Price  
    HN-1010 2.4 GHz 100 mW 75 460.8 kbps TNC $1,095.00
    HN-1510 2.4 GHz 100 mW 75 460.8 kbps TNC $896.00
    HN-2010 2.4 GHz 100 mW 75 460.8 kbps 2 TNC $1,346.00
    HN-210 2.4 GHz 100 mW 75 460.8 kbps Internal 6 dBi Patch $395.00
    HN-210D 2.4 GHz 100 mW 75 460.8 kbps Internal 6 dBi Patch $395.00
    HN-210DX 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $479.00
    HN-210X 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $479.00
    HN-211R 2.4 GHz 100 mW 64 1.23 Mbps Internal 6 dBi Patch $494.00
    HN-211RX 2.4 GHz 100 mW 64 1.23 Mbps Reverse TNC $554.00
    HN-211U 2.4 GHz 100 mW 64 1.23 Mbps Internal 6 dBi Patch $494.00
    HN-211UX 2.4 GHz 100 mW 64 1.23 Mbps Reverse TNC $554.00
    HN-214 2.4 GHz 100 mW 75 460.8 kbps Internal 6 dBi Patch $395.00
    HN-214D 2.4 GHz 100 mW 75 460.8 kbps Internal 6 dBi Patch $395.00
    HN-214DX 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $479.00
    HN-214U 2.4 GHz 100 mW 75 460.8 kbps Internal 6 dBi Patch $395.00
    HN-214UX 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $479.00
    HN-214X 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $479.00
    HN-3010 2.4 GHz 100 mW 75 460.8 kbps TNC $671.00
    HN-510 2.4 GHz 100 mW 75 460.8 kbps Reverse SMA $619.00
    HN-511 2.4 GHz Reverse SMA $746.00

    back to top

    I/O Modems
    RFMs HN I/O (HNIO-series) modems feature bidirectional transmission and the company's patented FHSS technology. The product line includes the HNIO-091R and HNIO-241R relay modems, which operate at 900 MHz and 2.4 GHz respectively, and two analog/digital modems, the 900 MHz HNIO-091A and 2.4 GHz HNIO-241A. The relay modems provide four 250VAC 5A relays, and the analog/digital modems provide two 4-20mA receivers and transmitters along with two digital I/O channels.

    Unlike wireless data transceivers, which transmit serial data streams, wireless I/O modems transmit voltage or digital signals. Analog/digital models are typically used to relay key levels of sensor data, while relay units control the state of such equipment as light fixtures, alarms, and locks. Line of sight range extends beyond 20 miles for the 900 MHz I/O modems and up to seven miles for the 2.4 GHz units, depending upon the antenna used. The modems can operate over an input voltage range of +9Vdc to +30Vdc, making them suitable for battery and solar power sources. Class I Div 2 certification allows the modems to be deployed in hazardous locations. All are DIN-rail mountable.

    RFM Part   Frequency   Transmit Power   Channels   Data Rate   RF Conn/ Antenna   List Price  
    HNIO-091A 900 MHz 1 W 54 172.8 kbps Reverse TNC $799.00
    HNIO-091AR 900 MHz 1 W 55 172.8 kbps Internal 3 dBi Patch $899.00
    HNIO-091AX 900 MHz 1 W 56 172.8 kbps Reverse TNC $899.00
    HNIO-091R 900 MHz 1 W 57 172.8 kbps Reverse TNC $799.00
    HNIO-091RR 900 MHz 1 W 58 172.8 kbps Internal 3 dBi Patch $899.00
    HNIO-091RX 900 MHz 1 W 59 172.8 kbps Reverse TNC $899.00
    HNIO-241A 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $799.00
    HNIO-241AR 2.4 GHz 100 mW 76 460.8 kbps Internal 6 dBi Patch $899.00
    HNIO-241AX 2.4 GHz 100 mW 77 460.8 kbps Reverse TNC $899.00
    HNIO-241R 2.4 GHz 100 mW 78 460.8 kbps Reverse TNC $799.00
    HNIO-241RR 2.4 GHz 100 mW 79 460.8 kbps Internal 6 dBi Patch $899.00
    HNIO-241RX 2.4 GHz 100 mW 80 460.8 kbps Reverse TNC $899.00

    back to top

    SEM Series Spread Spectrum Wireless Ethernet Bridges
    900 MHz and 2.4 GHz • 172.8 – 1.23 Mb/s
    RFM SEM series wireless Ethernet bridges provide high-speed wireless connectivity between distant Ethernet nodes where cable runs are impractical. All SEMs feature the company’s patented FHSS technology for robust RF performance. Typical SEM uses include Ethernet bridging, SCADA networking, PLC networking, and other industrial automation or data collection applications.

    SEMs can function as a high speed bridge between two 10/100 Base-T Ethernet networks; they can also provide wireless connectivity between an Ethernet network and multiple remote Ethernet network segments. Highly complex networks and extended coverage can be achieved by combining point-to-point or point-to-multipoint configurations with RFM repeaters.

    The RFM SEM Ethernet Bridges are Class I, Div. 2 certified in both the 900 MHz and 2.4 GHz bands. SEM bridges include a standard 10/100 Base-T Ethernet port, antenna, and power connectors. Five LEDs indicate power status and data activity. Class I Div 1 versions are available by special order.

    The SEM “D” model Ethernet radio is a DIN rail mount version, and the SEM “X” models use a remote, weatherproof, wireless Ethernet radio housed in a NEMA 4X / I.P. 66 enclosure.

    900 MHz SEM Ethernet Bridges — RFM SEM wireless 900 MHz Ethernet bridge is a high speed/long range wireless networking product that provides 172.8 kb/s over-the-air data rate and over 20 miles demonstrated communications range with 3 dB omni-directional antenna. Uses for a SEM wireless 900 MHz Ethernet bridge include SCADA networks, PLC networking, and other industrial automation or data collection applications.

    2.4 GHz SEM Ethernet Bridges — The SEM2410 and SEM2411 link Ethernet nodes in an industrial communication hierarchy up to 5 miles apart (with gain antennas). The over-the-air data rate for the SEM2410 is 460 Kb/s and 1.23 Mb/s for the SEM2411. RFM patented FHSS assures reliable performance even in high-multi-path and noisy RF environments.

    Ethernet Radio Security — RFM SEM wireless Ethernet bridges provide multiple levels of security. First, their communications use RFM proprietary frequency hopping spread spectrum (FHSS) protocol, which is understood only by other SEM Ethernet radio devices configured to use the same hopping pattern (out of 64 possibilities). To ensure that the SEM master communicates only with its intended SEM slaves, the SEM master can be configured to define the precise number of slaves (up to 62) that can register on the network, and can also be configured to authenticate an ID and password from each SEM slave prior to granting registration. Finally, SEM Ethernet radios include password protection for both console port and Telnet sessions, and can be configured to allow the opening of Telnet sessions only from specified IP addresses.

    *Boxed products based on WIT910, WIT934, and WIT2411 modules are not RoHS compliant.

    RFM Part   Frequency   Transmit Power   Channels   Data Rate   RF Conn/ Antenna   List Price  
    SEM2410 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $1,195.00
    SEM2410D 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $1,195.00
    SEM2410DX 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $1,349.00
    SEM2410X 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $1,349.00
    SEM2411 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC $1,399.00
    SEM2411D 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC $1,399.00
    SEM2411DX 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC $1,799.00
    SEM2411LC 2.4 GHz 100 mW 43 1.23 Mbps Internal 12 dBi Patch $799.00
    SEM2411X 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC $1,799.00
    SEM910 900 MHz 1 W 54 172.8 kbps Reverse TNC $1,195.00
    SEM910D 900 MHz 1 W 54 172.8 kbps Reverse TNC $1,195.00
    SEM910DX 900 MHz 1 W 54 172.8 kbps Reverse TNC $1,549.00
    SEM910X 900 MHz 1 W 54 172.8 kbps Reverse TNC $1,549.00

    back to top

    SNAP Series Wireless Access Points for Ethernet Network
    900 MHz and 2.4 GHz • 172.8 – 1.23 Mb/s
    As the base station for WIT series 900 MHz and 2.4 GHz OEM modules (WIT910, WIT2410, and WIT2411) and HN series modems, SNAP access points provide seamless Serial-to-Ethernet connectivity with remote wireless nodes transmitting unformatted data to a server-based application running on the SNAP Ethernet network. SNAP devices remove the need for the remote devices to handle the TCP/IP protocol. Certified by the FCC and CE marked on 2.4 GHz products, the SNAP family offers license-free use.

    RFM FHSS technology — Patented FHSS technology provides reliable communications in high noise floor environments, superior jamming and interference immunity. CRC checking and automatic repeat request (ARQ) deliver error-free data.

    Serial to Ethernet connectivity — Allows transparent communication with remote devices and network-based applications. Allows limited intelligence and legacy serial devices to appear as nodes on an Ethernet network.

    Customizable operation — All parameters are configurable under software control. Even transmit power can be selected through a straightforward command set.

    Suited to tough environments — All SNAPs are available in "D" DIN rail mount versions and "X" remote radio versions for harsh and outdoor use.

    *Boxed products based on WIT910, WIT934, and WIT2411 modules are not RoHS compliant.

    RFM Part   Frequency   Transmit Power   Channels   Data Rate   RF Conn/ Antenna   List Price  
    SNAP2410 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $896.00
    SNAP2410D 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $896.00
    SNAP2410DX 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $1,162.00
    SNAP2410X 2.4 GHz 100 mW 75 460.8 kbps Reverse TNC $1,162.00
    SNAP2411 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC $1,049.00
    SNAP2411D 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC $1,049.00
    SNAP2411DX 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC $1,349.00
    SNAP2411X 2.4 GHz 100 mW 43 1.23 Mbps Reverse TNC $1,349.00
    SNAP910 900 MHz 1 W 54 172.8 kbps Reverse TNC $896.00
    SNAP910D 900 MHz 1 W 54 172.8 kbps Reverse TNC $896.00
    SNAP910DX 900 MHz 1 W 54 172.8 kbps Reverse TNC $1,162.00
    SNAP910X 900 MHz 1 W 54 172.8 kbps Reverse TNC $1,162.00

    back to top

    WIRELESS MESH NETWORKING. RFM offers a broad range of wireless sensor networking products for commercial, light industrial, agricultural and urban infrastructure, and heavy industrial mesh applications.

    WirelessHART 2.4GHz
    XDM2510H Data Sheet Ultra Low Power Consumption
    • Innovative radio design consumes 80% less power in receive mode than competing solutions
    • Ultra-efficient power usage delivers over a decade of network operation on two AA batteries
    • Automatic network-wide coordination for efficient power usage
    Ultra Reliable Networking
    • WirelessHART delivers greater than 99.9% typical network reliability
    • Frequency hopping provides interference rejection and minimizes multipath fading
    • Mesh networking provides built-in redundancy
    • Every XDM2510H module acts as both an endpoint and a router, increasing network reliability
    • Automatic self-organizing mesh networking capability built in
    Ultra Easy Integration
    • Provides all the module functionality with no embedded programming or complex configuration required
    • Interfaces is well designed and multi-functional
    • High-level Data Link Control (HDLC) serial interface includes bi-directional flow control
    • Industrial temperature range -40 to +85 °C
    • XDM2510H-P version for plug in installation, XDM2510H-C version for solder reflow

    OPTIMUM NETWORK PERFORMANCE. The XDM2510H companion gateway and network manager – the XG2510H – combines standard Ethernet gateway functions with sophisticated networking, data, and security management capabilities for a network of XDM2510H modules. The network manager portion runs advanced algorithms to continuously optimize network performance and communications reliability to accommodate changing RF and environmental conditions. It also continuously monitors network performance and makes on-the-fly adjustments to ensure ultra-high data communications reliability. Adjustments include black-listing poor performing channels on a node-by-node basis and then white-listing them when conditions improve.

    SAME FORM FACTOR. At 1.05 sq. inch footprint, the XDM2510H series has the same form factor as RFM’s IEEE 802.15.4 LPR2430 series modules, Wi-Fi WSN802G modules and wireless mesh ZigBee ZMN2430 series modules.

    SAME PINOUT as RFM’s IEEE 802.15.4 LPR2430 series modules, Wi-Fi WSN802G modules and wireless mesh ZigBee ZMN2430 series modules.

    FCC / IC / ETSI CERTIFIED. The ZMN2430 series modules are certified for unlicensed operation in the USA, Canada and Europe.

    RoHS COMPLIANT. The XDM2510H complies with Directive 2002/95/EC (RoHS)

    RFM Part Frequency Data Rate Output Power RF Conn/ Antenna Development Kit List Price
    XDM2510HC 2.4 GHz 250 kbps 8 dBm U.FL XDM2510HDK $109.00
    XDM2510HP 2.4 GHz 250 kbps 8 dBm U.FL XDM2510HDK $109.00

    Wireless Mesh Developer Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Description   List Price  
    XDM2510HDK Contains 4 XDM2510H modules, 4 XDM2510H development boards, 1 XG2510HE gateway, 1 Ethernet and 5 Serial cables, 9 V batteries and wall-mount power supplies, Antennas and RF cables, Program CD with software and manuals, Quick Start Guide $2,995.00

    back to top
    WirelessHART. Based on DUST Networks’ IA-510(H) WirelessHART™ technology, the RFM XDM2510H module is designed to provide ultra-reliable communications and ultra-low-power for ultra-long battery life in a wide range of sensor network applications. The XDM2510H is tailored for use in battery and line powered wireless devices for applications that require proven performance and scalability in a WIrelessHART™ network. The XDM2510H modules allow OEMs to add WirelessHART capability to their process automation field devices.
    WirelessHART 2.4GHz Developer Kits - Order Today

    WirelessHART 2.4GHz
    XDM2510H Data Sheet Ultra Low Power Consumption
    • Innovative radio design consumes 80% less power in receive mode than competing solutions
    • Ultra-efficient power usage delivers over a decade of network operation on two AA batteries
    • Automatic network-wide coordination for efficient power usage
    Ultra Reliable Networking
    • WirelessHART delivers greater than 99.9% typical network reliability
    • Frequency hopping provides interference rejection and minimizes multipath fading
    • Mesh networking provides built-in redundancy
    • Every XDM2510H module acts as both an endpoint and a router, increasing network reliability
    • Automatic self-organizing mesh networking capability built in
    Ultra Easy Integration
    • Provides all the module functionality with no embedded programming or complex configuration required
    • Interfaces is well designed and multi-functional
    • High-level Data Link Control (HDLC) serial interface includes bi-directional flow control
    • Industrial temperature range -40 to +85 °C
    • XDM2510H-P version for plug in installation, XDM2510H-C version for solder reflow

    OPTIMUM NETWORK PERFORMANCE. The XDM2510H companion gateway and network manager – the XG2510H – combines standard Ethernet gateway functions with sophisticated networking, data, and security management capabilities for a network of XDM2510H modules. The network manager portion runs advanced algorithms to continuously optimize network performance and communications reliability to accommodate changing RF and environmental conditions. It also continuously monitors network performance and makes on-the-fly adjustments to ensure ultra-high data communications reliability. Adjustments include black-listing poor performing channels on a node-by-node basis and then white-listing them when conditions improve.

    SAME FORM FACTOR. At 1.05 sq. inch footprint, the XDM2510H series has the same form factor as RFM’s IEEE 802.15.4 LPR2430 series modules, Wi-Fi WSN802G modules and wireless mesh ZigBee ZMN2430 series modules.

    SAME PINOUT as RFM’s IEEE 802.15.4 LPR2430 series modules, Wi-Fi WSN802G modules and wireless mesh ZigBee ZMN2430 series modules.

    FCC / IC / ETSI CERTIFIED. The ZMN2430 series modules are certified for unlicensed operation in the USA, Canada and Europe.

    RoHS COMPLIANT. The XDM2510H complies with Directive 2002/95/EC (RoHS)

    RFM Part Frequency Data Rate Output Power RF Conn/ Antenna Development Kit List Price
    XDM2510HC 2.4 GHz 250 kbps 8 dBm U.FL XDM2510HDK $109.00
    XDM2510HP 2.4 GHz 250 kbps 8 dBm U.FL XDM2510HDK $109.00

    back to top

    Development Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Frequency   Description   List Price  
    XDM2510HDK 2.4 GHz Contains 4 XDM2510H modules, 4 XDM2510H development boards, 1 XG2510HE gateway, 1 Ethernet and 5 Serial cables, 9 V batteries and wall-mount power supplies, Antennas and RF cables, Program CD with software and manuals, Quick Start Guide $2,995.00
    ZigBee Pro Modules ZigBee Standard Modules  
    ZigBee Pro Stack: ZigBee Pro features ZigBee Smart Energy and Home Automation Profiles.

    The ZPM3570 is built around Ember's EM357 ZigBee RFIC coupled with a power amplifier and low noise amplifier to increase the RF transmit power and receive sensitivity. The 100mW coupled with the -103dBm receive sensitivity provides exceptional range. The on-module antenna keeps device costs low by eliminating the cost of a separate antenna.

    ZIGBEE PRO SMART ENERGY AND HOME AUTOMATION

    The two areas where ZigBee is developing significant traction is in the Smart Grid and Energy Management areanas. The ZPM supports these applications through its support of the ZigBee Smart Energy and Home Automation profiles. An intuitive API simplifies connecting the ZPM3570 to an application processor to quickly implement products providing vendor interoperable Smart Energy and Home Automation operation. OEMs wishing to implement their own application in addition to the ZigBee stack can take advantage of the 32-bit M3 Coretex ARM processor in the module. This can eliminate the need for any separate application co-processor.

    1MB FLASH MEMORY FOR DATA LOGGING

    Included in the price and size of the module is a 1 MB flash memory. Unlike other modules where external memory is required to provide the datalogging functionality, the ZPM3570 has it on the module. One less thing for the designer to worry about.

    SMALL SIZE

    At less than 0.63 square inches in area, the ZPM3570 is unsurpassed in providing a complete ZigBee PRO solution, with on-module chip antenna, and 1MB flash in such a small footprint. For many devices that need ZigBee PRO functionality, size is critical and real estate is at a premium. The ZPM3570 really delivers on this account. In addition to the small footprint, the surface mount design of the ZPM3570 eliminates the need for costly, in both dollars and board area, connectors.

    FCC / IC / ETSI CERTIFIED. All RFM ZigBee modules are certified for unlicensed operation in the USA, Canada and Europe.

    ZigBee Pro Modules
    RFM Part   Frequency   Transmit Power   Data Rate   RF Conn / Antenna   Development Kit  
    ZPM3570-C 2.4 GHz 100 mW 250 kbps Chip Antenna ZPM3570DK
    ZPM3570-E 2.4 GHz 100 mW 250 kbps Chip Antenna ZPM3570DK

    ZigBee Pro Development Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Frequency   Description   List Price  
    ZPM3570DK 2.4 GHz The ZPM3570DK Development Kit Contains
    • (2) ZPM3570 development boards
    • (2) USB and 2 Serial Cables
    • 9V Batteries and Wall-mount Power Supplies
    • Antennas and RF Cables
    • Program CD with software and manuals
    • Quick Start Guide    		 $199.00

    back to top

    ZIGBEE STANDARD. Based on the IEEE 802.15.4 standard and the ZigBee protocol stack, the ZMN2430 series modules are easy to integrate and provide robust wireless communications for mesh networking. They are suitable for a variety of applications including sensor monitoring, building and home automation, and any other applications requiring low-power consumption.
    Modules Developer Kits - Order Today Gateways  

    LOW-POWER. Comprised of the low-power 1mW RF power ZMN2430 / ZMN2430A and the high power 100mW RF power ZMN2430ER / ZMN2430ERA, the ZMN2430 series modules are based on the CC2430 SOC, the sleep current is less than 3uA for the entire module.

    FLEXIBILITY. ZMN2430 Series modules include the CSM private profile firmware which features a flexible and simple-to-use Application Programming Interface. Designers can also write their own code if desired.

    SLEEP CAPABILITY. ZMN2430 series modules provide years of battery operation supported through two sleep modes. Timer sleep allows the module to be configured to wake as often as every 100 milliseconds or as infrequently as once every 3.5 years. Interrupt sleep lets the module sleep until it is awoken by an edge triggered interrupt. Regardless of what wakes the module, the designer can configure the module to remain awake for up to 2 seconds after sending its data to provide an opportunity for an application to communicate to the module before it returns to sleep.

    I/O AND AUTO REPORT CAPABILITY. ZMN2430 series modules feature Analog, Digital and Serial I/O.

    • Standard UART interface for serial communications plus 6 GPIO, 3 ADCs, and 2 DACs (PWMs)
    • Auto-reporting features allow many sensor nodes to be built without a dedicated microcontroller - the micro-controller on the module does all the work
    • Auto-reporting mode provides module I/O updates based on timer or interrupts - without the need for the application to poll or otherwise request data
    • Interrupts are generated by edge-triggered events - and any interrupt can be used to wake a sleeping mode and have the module send its I/O data
    SAME FORM FACTOR. At 1.05 sq. inch footprint, the ZMN2430 series has the same form factor as RFMs IEEE 802.15.4 LPR2430 series modules, Wi-Fi WSN802G modules and wireless mesh XDM2140 series modules.

    SAME PINOUT as RFMs IEEE 802.15.4 LPR2430 series modules, Wi-Fi WSN802G modules and wireless mesh XDM2140 series modules.

    FCC / IC / ETSI CERTIFIED. The LPR2430 series modules are certified for unlicensed operation in the USA, Canada and Europe.


    back to top

    ZigBee OEM Modules
    RFM Part   Frequency   Transmit Power   Data Rate   RF Conn/ Antenna   Development Kit   List Price  
    ZMN2405-C 2.4 GHz 1 mW 250 kbps Module Pin ZMN2405DK $22.00
    ZMN2405-E 2.4 GHz 1 mW 250 kbps Module Pin ZMN2405DK $22.00
    ZMN2405-R 2.4 GHz 1 mW 250 kbps Module Pin ZMN2405DK $22.00
    ZMN2405HP-C 2.4 GHz 10 to 100 mW 250 kbps Module Pin ZMN2405HPDK $36.00
    ZMN2405HP-E 2.4 GHz 10 to 100 mW 250 kbps Module Pin ZMN2405HPDK $36.00
    ZMN2405HP-R 2.4 GHz 10 to 100 mW 250 kbps Module Pin ZMN2405HPDK $36.00
    ZMN2405HPA-C 2.4 GHz 10 to 100 mW 250 kbps Chip Antenna ZMN2430HPADK $37.50
    ZMN2405HPA-E 2.4 GHz 10 to 100 mW 250 kbps Chip Antenna ZMN2430HPADK $37.50
    ZMN2405HPA-R 2.4 GHz 10 to 100 mW 250 kbps Chip Antenna ZMN2430HPADK $37.50
    ZMN2430-C 2.4 GHz 1 mW 250 kbps Module Pin ZMN2405DK $21.50
    ZMN2430-E 2.4 GHz 1 mW 250 kbps Module Pin ZMN2405DK $21.50
    ZMN2430-R 2.4 GHz 1 mW 250 kbps Module Pin ZMN2405DK $21.50
    ZMN2430A-C 2.4 GHz 1 mW 250 kbps Chip Antenna ZMN2430ADK $23.00
    ZMN2430A-E 2.4 GHz 1 mW 250 kbps Chip Antenna ZMN2430ADK $23.00
    ZMN2430A-R 2.4 GHz 1 mW 250 kbps Chip Antenna ZMN2430ADK $23.00
    ZMN2430HP-C 2.4 GHz 10 to 100 mW 250 kbps Module Pin ZMN2405HPDK $35.00
    ZMN2430HP-E 2.4 GHz 10 to 100 mW 250 kbps Module Pin ZMN2405HPDK $35.00
    ZMN2430HP-R 2.4 GHz 10 to 100 mW 250 kbps Module Pin ZMN2405HPDK $35.00
    ZMN2430HPA-C 2.4 GHz 10 to 100 mW 250 kbps Chip Antenna ZMN2430HPADK $37.00
    ZMN2430HPA-E 2.4 GHz 10 to 100 mW 250 kbps Chip Antenna ZMN2430HPADK $37.00
    ZMN2430HPA-R 2.4 GHz 10 to 100 mW 250 kbps Chip Antenna ZMN2430HPADK $37.00

    back to top

    ZigBee Developer Kits


    Fast-track Your Designs...
    Order Your Developer Kit Today!

    RFM RF Modules Developer Kits include the technology hardware and software to support the development and integration of RFM RF Modules into any machine-to-machine (M2M) application.

    RFM Part   Frequency   Description   List Price  
    ZMN2405DK 2.4 GHz Contains: 2 ZMN2405 ZigBee evaluation boards (high-power serial interface boards built around the 1 mW ZigBee ZMN2405 module), 2 AC power adapters and cords, 2 patch antennas, 2 USB cables, 2 Serial cables, 2 RF cables, 2 omni antennas, 2 9 V batteries, 1 Software CD $299.00
    ZMN2405HPDK 2.4 GHz Contains: 2 ZMN2405HP evaluation boards (high-power serial interface boards built around the 100 mW ZigBee ZMN2405HP module), 2 AC power adapters and cords, 2 patch antennas, 2 USB cables, 2 Serial cables, 2 RF cables, 2 omni antennas, 2 9 V batteries, 1 Software CD $299.00
    ZMN2430ADK 2.4 GHz Contains: 2 ZMN2430A evaluation boards (high-power serial interface boards built around the 1 mW ZigBee ZMN2430A module), 2 AC power adapters and cords, 2 patch antennas, 2 USB cables, 2 Serial cables, 2 RF cables, 2 omni antennas, 2 9 V batteries, 1 Software CD $299.00
    ZMN2430HPADK 2.4 GHz Contains: 2 ZMN2430HPA evaluation boards (high-power serial interface boards built around the 100 mW ZigBee ZMN2430HPA module), 2 AC power adapters and cords, 2 patch antennas, 2 USB cables, 2 Serial cables, 2 RF cables, 2 omni antennas, 2 9 V batteries, 1 Software CD $299.00
    ZMN24HPDK-B 2.4 GHz Contains: 1 serial / sensor evaluation board configured as a Router, 1 ZN-241Z serial radio modem built around the ZigBee ZMN2405HP module configured as a Coordinator, 1 patch antenna, 1 USB cable, 2 Serial cables, 1 RF cable, 2 omni antennas, 1 9 V battery, 1 Software CD $199.00

    back to top

    Click Here     to Select & Compare Ready-Made RF Modules

    RFM2M

    Antennas & Accessories