The RFM LPR Series of 802.15.4 2.4GHz modules for OEMs is loaded with features and functions that enable designers to configure the
module to do just what they need it to do without having to write their own code. These features and functions make the LPR2430 Series
the obvious choice for wireless sensor networking
including battery-powered applications for peer-to-peer, point-to-point and point-to-multipoint
wireless designs.
Comprised of the low-power 1mW RF power LPR2430 / LPR2430A and the extended range 100mW RF
power LPR2430ER / LPR2430ERA, the RFM LPR2430 Series modules provide the flexibility and versatility to serve a variety of
applications, from simple cable replacement to remote terminal data collection to sophisticated sensor networks.
Based on the IEEE standard 802.15.4, the LPR2430 Series modules are easy to integrate and provide robust wireless communications in
applications where meshing is not needed or desired.
Data Sheet |
Freq. (MHz) |
Transmit Power |
Channels |
Data Rate |
802.15.4 Modules |
| LPR2430 |
2.4 GHz |
1 mW |
16 |
250 Kbps |
| LPR2430A |
2.4 GHz |
1 mW |
16 |
250 Kbps |
| LPR2430ER |
2.4 GHz |
10/100 mW |
15 |
250 Kbps |
| LPR2430ERA |
2.4 GHz |
10/100 mW |
15 |
250 Kbps |
 |
802.15.4 Development Kits |
| LPR2430DK |
Development kit for the LPR2430 module including two development boards providing a simple means to
interface to your device and showcasing LPR2430 features and utility programs that demonstrate network operation and performance
|
| LPR2430ADK |
Development kit for the LPR2430A module including two development boards providing a simple means to
interface to your device and showcasing LPR2430A features and utility programs that demonstrate network operation and performance
|
| LPR2430ERDK |
Development kit for the LPR2430ER module including two development boards providing a simple means to
interface to your device and showcasing LPR2430ER features and utility programs that demonstrate network operation and performance
|
| LPR2430ERADK |
Development kit for the LPR2430ERA module including two development boards providing a simple means to
interface to your device and showcasing LPR2430ERA features and utility programs that demonstrate network operation and performance
|
802.15.4 Wireless Serial Data Modem
|
The ZN-241G is a low-cost, 802.15.4 wireless data modem that can provide an auto-configured, wireless replacement for RS-232 cable in office environments, and can also serve as a platform for multi-drop RS-485 networks in industrial settings. Housed in a ruggedized metal enclosure, the ZN-241G replaces hard wiring in commercial environments that make wired connections challenging or impractical or that require frequent reconfiguration.
For point-to-point communications, ZN-241Gs configure the link automatically; all that’s required is plugging the devices into two serial interfaces and turning on power. Point-to-multipoint links are set up by via an included utility that simplifies the configuration of network IDs and channels, and a repeater function allows a remote node to relay data through another remote node when the direct path is blocked. The ZN-241G offers RS-232, USB, and RS-485 interface options, and operates license-free worldwide at 2.4 GHz with over-the-air data rates of up to 250 Kbps.
|
|
ZN-241G
|
(Standalone RS-232 serial 802.15.4 modem providing 100mW transmit power with included 2dB dipole antenna)
|
ZN-241GSK
|
(Started kit including 2 ZN-241Gs, 2 2dB dipole antennas, 2 power supplies, 2 serial cables and Windows-based configuration utility)
|
ZN-241GI
|
(Same as ZN-241G but with half-duplex RS-485 interface and screw terminal connections for serial data and power supply)
|
ZN-241GU
|
(Same as ZN-241G but with a USB interface)
|
ZN-241GOEM
|
(10 Pack of the ZN-241G without antenna, power supply or serial cable)
|
ZN-241GIOEM
|
(10 Pack of the ZN-241GM without antenna or power supply)
|
ZN-241GUOEM
|
(10 Pack of the ZN-241GU without antenna, power supply, or USB cable)
|
